Contact JD Performance @ 951.676.7957 or jdpatv@yahoo.com

All bushings wear over time, it's a fact of life. Every time your arm pivots up and down there is the smallest amount of wear. JD Performance suggests that you replace your bushings every other year, unless you use your quad for racing, then every year is suggested.
The best way to increase the life of your bushings is to add a bearing kit to your front end!
 
Adding a bearing to the front pivot points of your quad is a very subtle yet affective upgrade. The bearing will eliminate the wear around the barrel of the bushing, while providing a smooth, fluid like pivot from the arm.  A complete Bushing and Bearing kit includes bushings, inner sleeves and bearings for each pivot point of A-arms.  Upgrade kit and bushings that this set is complete for all four arms  uppers and lowers left and right side complete set.
  • Replacement  bushing/sleeve kit= $85
  • Replacement bearing/bushing/sleeve kit=$150
  • Needle bearing upgrade = $70  (when ordering new arms)
 

If you have currently have JD A-arms, you can upgrade to the bushing/sleeve/bearing kit

 for only

 

$150


*includes new inner sleeve, bushings and bearings for upper and lower arms

When ordering new JD A-arms,

add needle bearings to your a arm order 

 

$85

 


*adds bearings to order of new complete set

 
 

JD Performance

Mon-Fri 9am-6pm Pacific Standard Time

(951) 676-7957
jdpatv@yahoo.com